PLASTEX FABRICATORS CHOOSES GATORFOAM® FOR LIGHTWEIGHT, DIMENSIONAL STORE DECOR
Plastex Fabricators of Charlotte, Inc., a custom commercial fabricator based in Charlotte, N.C., has specialized in meeting the interior décor needs of several East Coast-based supermarket chains and convenience stores for the past 20 years.
Plastex began its long-standing relationships with these retailers by fabricating plastic sneeze guards to protect food offerings, according to Dan George, purchasing manager and designer, Plastex Fabricators, who said the company soon after was asked to fabricate store décor – including wall work, millwork and cabinets – originally utilizing melamine and plywood materials.
While melamine and plywood are sturdy substrates, they also are heavy materials that pose a potential danger to store customers, employees and installers when interior décor pieces fabricated from these materials are suspended overhead. That’s why Plastex began fabricating interior décor and signage for these retailers from Gatorfoam® graphic display board by 3A Composites USA at least 15 years ago, said George.
Gatorfoam ( http://www.graphicdisplayusa.com/gatorfoam/substrate/) consists of polystyrene foam bonded between two layers of wood-fiber veneer laminate. This unique construction makes Gatorfoam rigid yet lightweight and warp-resistant; its surface also is exceptionally smooth and strong, offering superior dent- and scratch-resistance.
“We use a lot of Gatorfoam,” said George. “It cuts well and produces a good edge. It’s lightweight and, therefore, much safer to hang from the wall or from the ceiling. Gatorfoam is a very consistent product that’s made to last. We fabricate long-term displays that will be up for five years or longer.”
Plastex Fabricators’ supermarket chain and convenience store customers regularly update décor and signage. Plastex employees will devote approximately two months to updating an entire store’s décor, according to George, who said these retailers rely upon Plastex to recommend materials.
“The customer usually has a firm for design work,” said George. “We take the concepts and make them work. … We use Gatorfoam because it’s lightweight yet sturdy and can be used to create a display that looks dimensional. It’s a material that is very versatile and easy to work with.”
Plastex Fabricators utilizes Gatorfoam to create multi-layered two-sided departmental signage and store décor as well as cut-out lettering. Cutting is achieved with CNC routers, while pieces are custom spray-painted with Sherwin Williams paints. Pieces that require digital printing or screen printing are sourced out, while laminated décor is completed in-house. Multiple layers of Gatorfoam used to create small store décor pieces are attached with foam tape or silicone, while large signs are screwed together, according to George.
Plastex creates the majority of its displays with Gatorfoam – which is distributed by the Charlotte, N.C., branch of Polymershapes, the distribution unit of SABIC – in the Bright White and Black colors in thicknesses ranging from 3/16-inch to 2 inches and in standard sheet sizes up to 60-inches by 120-inches.
“Polymershapes does a very good job of keeping us stocked with Gatorfoam,” said George.
(Gatorfoam sheets are manufactured by 3A Composites USA in standard 48-by-96 inch sheets and 60-by-120 inch sheets in the Bright White, Black and Neutral colors and in thicknesses ranging from 3/16 inches to 2 inches.)
For more photos of Plastex displays fabricated with Gatorfoam, like us on Facebook at http://on.fb.me/xxbiE3 and visit the “Gatorfoam Displays by Plastex Fabricators” Photo Album.
For more information about Gatorfoam, call (800) 626-3365 or email info.usa@3AComposites.com.
By Product:OMNI-FLUTE™ (3)
FOME-COR® BOARD (5)
SINTRA® PVC (15)
By Application:P-O-P Displays (17)
Exhibits & Kiosks (15)
Signage - Interior (6)
Signage - Exterior (9)
By Fabrication:Mounting (15)
Repositioning Vinyl (3)
Digital Printing (19)
Screen Printing (9)
Knife Cutting (5)
Saw Cutting (13)
Die Cut/Punch (5)
Forming Curves (7)